The most innovative brakedisc guard available on the market. The unique fitting system with one central adapter removes the axle spacer. This allows wheel change without removing the disc guard. Les mer

Version 54810061000 and 5481006100030 fits only until 2007 models and early production of 2008 models .
Les mer

The most innovative brakedisc guard available on the market. The unique fitting system with one central adapter removes the axle spacer. This allows wheel change without removing the disc guard. Les mer

Brakesystem bleeding as simple as possible.
Change the original bleeder screw on the brake calliper, to this new bleeder screw with included holding valve. You just have to open the screw of the non return-valve a half turn and pump the brake fluid with the brake lever through the brake system. The holding valve avoids that air is coming back into the System. You don't need to have a second person to pump or open and close the bleeder screw.
Changing the brakefluid or bleeding the system is done in seconds. Comes with anodized mud cap. M8.
For EXC MY09 "Six Days", EXC 10- and SX MY09-
Les mer

x Les mer

Brakesystem bleeding as simple as possible.
Change the original bleeder screw on the brake calliper, to this new bleeder screw with included holding valve. You just have to open the screw of the non return-valve a half turn and pump the brake fluid with the brake lever through the brake system. The holding valve avoids that air is coming back into the System. You don't need to have a second person to pump or open and close the bleeder screw.
Changing the brakefluid or bleeding the system is done in seconds. Comes with anodized mud cap.
M10x1.

For rear brake calliper:
SM 07-10, SMC 08-10, Duke 08-10, Enduro 08-10
For front brake calliper:
Enduro 08-10
Not for MY 09 Sixdays, and 09 SX models!
Les mer

Brakesystem bleeding as simple as possible.
Change the original bleeder screw on the brake calliper, to this new bleeder screw with included holding valve. You just have to open the screw of the non return-valve a half turn and pump the brake fluid with the brake lever through the brake system. The holding valve avoids that air is coming back into the System. You don't need to have a second person to pump or open and close the bleeder screw.
Changing the brakefluid or bleeding the system is done in seconds. Comes with anodized mud cap.
For front brake callipers:
SM 07-10, SMC 08-10, Duke 08-10 Les mer

This item adds capacity to your rear brake reservoir. The cooling fins help dissipate heat and help you avoid brake fade. If aftermarket exhaust systems are used it is possible that you cannot mount the extender . Les mer

Orange rear brake reservoir cover adds that finished look to your KTM . O-Ring and mebran are not included, can be used from original part . Les mer

Thanks to the higher mechanical characteristics of the aluminium alloy and the extremely developed calliper profile, it’s been possible to reach even higher calliper stiffness without any weight increase. This gives the brake system the better feeling and greater performance! Les mer

Thanks to the higher mechanical characteristics of the aluminium alloy and the extremely developed calliper profile, it’s been possible to reach even higher calliper stiffness without any weight increase. This gives the brake system the better feeling and greater performance!
For 260mm disc Les mer

Please read manual . There you can find all necessary parts for mounting .
Les mer

Lost pins, a thing of the past - easy to change brake pads, even in dirty conditions. Les mer

For SX/EXC Les mer

For Supermoto , Brembo 16mm piston , Les mer

This new Radial Master Cylinder ( 12mm ) was developed for Offroad and Supermoto bikes. It is very compact and very light ( 305 g ). CNC Machined from solid Alloy, using a three bearing system, it delivers an exceptional braking feel. The short lever is easy to adjust and the overstroke of the piston is individually and accurately adjusted at the manufacturer. Fits perfectly with the 4-piston caliper 58413015644 and the 6-piston caliper 59413015044. Les mer

Usable for 320mm brake disc 583.09.060.000 with 2 piston brembo caliper . Les mer

Usable for 320mm brake disc 583.09.060.000 with 2 piston brembo caliper . Les mer

Brake disc ( 310mm ) 58609060000 is necessary . Mounting with standard brake hose and standard handbrakecylinder from EXC/SX models possible . Only for use with 17" or 16,5" front wheel . Les mer